About OxfordAQA International AS Physics
OxfordAQA International AS Physics is specification 9630. This page works from version 4.4, which covers International AS and A-level exams from May/June 2020 onwards.
The qualification is modular, and the International AS is made of two units.
Unit 1 is Mechanics, materials and atoms. Unit 2 is Electricity, waves and particles.
Each unit is a written exam of 2 hours carrying 80 marks. Each is 50 per cent of the International AS assessment and 20 per cent of the International A-level assessment.
Two hours is worth noticing. That is a long paper, and it is long because the subject is full of calculation and data work rather than because there is more to memorise.
Exams are available in January and in May/June, so there are two opportunities in the same academic year. Candidates may re-sit a unit any number of times within the shelf-life of the specification, and the best result for each unit will count towards the final qualification.
The International AS qualification is graded on a five point scale: A, B, C, D and E. The full International A-level is graded A star to E.
Each unit has the same three section structure, and the order of those sections is deliberate.
Section A is worth 50 marks and contains short and long questions. Within it the balance is about 15 marks in 4 to 7 short questions and 35 marks in 3 to 5 long questions.
Section B is worth 16 marks and contains data analysis and application questions.
Section C is worth 14 marks and is multiple choice.
So a quarter of each paper is not writing at all. And the specification explains why the multiple choice comes last. It states that multiple choice questions are given at the end of papers allowing students to manage their time better.
That is a real exam technique instruction disguised as a layout note. The open ended writing can expand to fill whatever time is available, so the multiple choice section is the part that can be lost to the clock. A student who reaches it with eight minutes left and can answer quickly converts 14 marks that were sitting there.
The content of Unit 1 covers three sections. Measurements and their errors. Mechanics and materials. Particles, radiation and radioactivity.
Measurements and their errors begins with the use of SI units and their prefixes, the limitation of physical measurements, and the estimation of physical quantities.
Mechanics and materials covers scalars and vectors, moments, motion along a straight line, projectile motion, Newton's laws of motion, momentum, work energy and power, conservation of energy, the bulk properties of solids, and the Young modulus.
Particles, radiation and radioactivity covers the constituents of the atom, elementary particles, and radioactivity.
The content of Unit 2 covers two sections. Electricity, and oscillations and waves.
Electricity covers the basics of electricity, current voltage characteristics, resistivity, circuits, the potential divider, and electromotive force and internal resistance.
Oscillations and waves covers oscillating systems, forced vibrations and resonance, progressive waves, longitudinal and transverse waves, the principle of superposition and the formation of standing waves, interference, diffraction, refraction at a plane surface, collisions of electrons with atoms, the photoelectric effect, and wave particle duality.
So Unit 1 is five sections of mechanics and matter and Unit 2 is electricity and waves, and the five content sections in total are the whole of the AS.
The specification states this boundary precisely: sections 3.1 to 3.5 will be assessed in the International AS exams, and all content will be assessed in the full International A-level.
There is also a cross unit rule. Unit 2 states that although content led questions will not be set on topics from Unit 1, questions may draw on the physics principles specified for Unit 1.
One detail in Section B and C is worth knowing. Unit 2's Section B draws on all of sections 3.1 to 3.5, while its Section C multiple choice is drawn only from sections 3.4 and 3.5.
So the multiple choice section on Unit 2 is strictly about the Unit 2 content, while the data analysis section can reach back to anything in the AS.
There are four assessment objectives. AO1 is knowledge and understanding of scientific principles and concepts. AO2 is application of knowledge and understanding in both familiar and novel contexts. AO3 is the ability to describe, analyse, interpret and evaluate scientific information presented in different forms. AO4 is the ability to select, describe and evaluate scientific procedures.
At International AS the weightings are AO1 at 28 per cent, AO2 at 36 per cent, AO3 at 28 per cent and AO4 at 8 per cent.
Both units weight them identically, at 14 per cent AO1, 18 per cent AO2, 14 per cent AO3 and 4 per cent AO4 each.
Application is the largest objective, and evaluation of procedures is the smallest at 8 per cent. That is a different balance from the other sciences in this suite, where procedures carry considerably more weight, so a student taking two sciences should not assume the same approach works for both.
Practical work is required and is not assessed by coursework or by a practical exam.
The specification states that it includes ten required practicals designed to give students a broad range of practical experiences, that these will be assessed via the written papers, and that this gives schools flexibility in how they deliver practical work. It also states that the method ensures students gain key skills without the pressures of coursework or practical exams.
The practicals named in the specification include determination of g by a freefall method, investigation of the load extension graph for a wire and determination of the Young modulus, investigation of the emf and internal resistance of electric cells and batteries, investigation into simple harmonic systems using a mass spring system, investigation of interference effects including the Young's slit experiment, investigation of the charge and discharge of capacitors, investigation of the efficiency of a transformer, determination of specific heat capacity by an electrical method, investigation of Boyle's law and Charles's law, and investigation of the inverse square law for light using an LDR and a point source.
The practicals span both the AS and the A-level content, so a school planning an AS-only year should check which of the ten belong to the units being taught rather than assume all ten are AS work.
The specification also states that students can be examined on the principles and techniques required when carrying out these practicals. The apparatus and the technique matter, not just the result.
The specification notes that practical work is at the heart of science, and that the required practicals were chosen to minimise the use of resources or equipment that could present difficulties in resourcing. That is a practical statement about how these investigations can actually be run in an ordinary school laboratory.
The overall aim of the qualification is that students develop their interest in and enthusiasm for physics, develop and demonstrate a deeper appreciation of the skills knowledge and understanding of physics, and develop essential knowledge and understanding of different areas of physics and how they relate to each other.
Who OxfordAQA International AS Physics 9630 Is For
This course suits Year 12 students sitting OxfordAQA International AS Physics 9630 who can recall the formulae but lose the data analysis and multiple choice marks at the end of each paper.
- Year 12 students taking Units 1 and 2 as a standalone AS qualification
- Students carrying the units forward into the full A Level
- Students who run out of time before the multiple choice section
- Students who cannot yet plot and process data from an experiment
- Students aiming at physics, engineering or any physical science degree


OxfordAQA International AS Physics: The Board We Cover
OxfordAQA is the board this page covers. Every fact here comes from OxfordAQA's own 9630 specification.
OxfordAQA
OxfordAQA International AS Physics is syllabus 9630, two modular 2 hour units of 80 marks each, examined in January and in May/June.
How Centaurus Helps OxfordAQA International AS Physics Students Excel
Three Sections
50 marks of short and long questions, 16 marks of data analysis, and 14 marks of multiple choice.
The Multiple Choice Ending
Section C is at the end of each paper, so timing is planned to protect those 14 marks.
Two Hour Papers
A full 2 hour paper with the stamina and pace that 80 marks of calculation and data work demands.
Ten Required Practicals
Assessed through the written papers, so apparatus and technique are taught as exam content.
Data Analysis
Section B draws on any content in the AS, so graphs and errors are drilled across the whole course.
24/7 Progress Reporting
Families get access to the Centaurus Academy LMS, with attendance, progress and lesson notes available to parents, students and teachers at any time.

Why Centaurus Stands Out
Choosing the right OxfordAQA International AS Physics support makes a real difference. Here is how Centaurus Academy compares with typical online providers.

Meet our Team Of Experts
Our expert tutors bring deep subject knowledge and a passion for teaching — helping every student reach their full potential.

What Parents Say About Us
Hear from the parents and students who have experienced our personalised teaching first-hand.
Excellent long-term experience
We have an excellent long-term experience with the academy and Sir Awais. Our three children studied with them during different periods and succeeded well. We highly recommend the academy.
Excellent academy
Centaurus Academy is truly one of the best educational institutions I've come across. The environment is nurturing, the staff are incredibly dedicated, and the quality of education is outstanding. They focus not only on academic excellence but also on character building and personal growth. The teachers are supportive and go the extra mile to ensure every student feels confident and motivated.
My child has gained confidence
I'm very satisfied with the dedication and teaching approach. My child has gained confidence and improved significantly in understanding math concepts, thanks to the teacher's clear explanations and supportive guidance.




OxfordAQA International AS Physics: Frequently Asked Questions
Explore Tutoring by Country:
Pick your country to see the boards, levels, and subjects our tutors cover near you.

Step Into Your Success
Book a demo lesson today and see how one-on-one tutoring can help your child reach their goals.
.png&w=3840&q=75&dpl=dpl_3qjkhsDXCyVAL5K1zphW7NnELfQY)








